ArcoLinux -D -B 19.5 iso's have been released

[SOLVED] neofetch - update error

User avatar
MicroCode
Crewman
Posts: 21
Joined: Mon Jan 08, 2018 9:32 am
Croatia
[SOLVED] neofetch - update error

Post by MicroCode » Tue Jun 19, 2018 8:23 pm

ArcoLinuxB - openbox v6.8.5

after update neofetch to version neofetch-5.0.0-1-any.pkg.tar.xz everything is confused :?
I am opened any terminals and the same error
not good fonts or something else


Code: Select all

�PNG

IHDR��X��d�IT pHYs88�fNtEXtSoftwarewww.inkscape.org��<�IDATx���}t\u���sof��Ҽ̈́�,H@
                                                                                       &e
��D�i���K�9A�X��1}q��,#�Bu:Xݝz�����[0���[N��ӹ��"�?��ߜ                             ��
                                                          ���N�Q'�#��±����������#�?u ��.
w��=�|�e���OڙG���KBq�1���Z���rxwi����
                                      �&���y_�{���Ry�w#L.g��64�����E�(��Ж:	A\p�*�a�
�                                                                                       �
 �����D��(A��r����\��
                         �N0�+��[�����.g/ԑ�a��XK�.�Uvtq�                          
���=����sЭ�6���d�-ΐ�1I���H                                   �����uk�St�YS���ƿ�ܭn�u��
                           �@k��#�c�����5�Z �ei���yoSl�Z��@�e
��g_�oU��T�,�c���
                  ?��r�Y��� �[����.�3y�t�b�#�,�bCg�^P)��Dtkn�t�%b+
0�57kծ��Q�t���_O�g�xN���G?We��[sgGG�Y ���
                                            e�tĿN:D��d��c��Z�P\߻�����cMͰt�b�#�
                                                                                Y������B
                                                                                        
                                                                                        �
                                                                                        N
��K�p��pRZ 'PIٍ��s8��p,u�/��B�+PY��%f=�aZ S0                                          p
~e�=a`�\k�ܮ�3�Hg��r}�|6\�WXx��4K������xK86p5��/��#R~�8g[K���x�� ��-�1<$���6�^Q�#HSlo
;`�p��~-���V�v��ʶ@<t�`���O�F�4n�u                                                    �
                                    �4�V7w�/���3U���{�k���r��y������P�c�T�<�e�x�^�=����
O/��l^���1� ���xWm�:�n)���`I����?���XH������]�f����F���:����W�s8Q�������)�V6�ܝ\B��
                                                                ���P� cc���Z�h6��@K�5
%[ �'�ߢD���H�OA���m�1ݵ�����9�T����"D�sxmh8�É�s���Ɯh;_                                �
                                                        }~Z+��i%Y 4�ZE���9
                                                                           �ݩ�<[�`7�8�h
                                                                                        �
�?2o��,����NvEj�
                  ���,s����O��ᄒ*��C���q5;w��JOU� �r�/t�\���xQI�Q�[P�p���S /��
2=�z�6%Q l�fU�1~�`�^�,+�“�\��3����T�29�E:�ŴA��ؾH����̀��́�+�1M���
���p���N�m��b�j�r�ޱ���4�vRZ[�,@��@                          |��H��$3�%cf� }��gV�
                                          ���hb���g�z�	�xM8���z?'�� EY ��䧙�Q�o`N�G !
                                                                                        �
���                                                                                    
���l�v��E�x�V�X|�e���
��欢:��(
��P�o��-^��3�0奡�e �oz��
                           7
                            ���zxo�	�opUf�p��%"�}�	ǘ�>�C8C�<_ F�o#�o�%�F�O
��5�`H8�ڕے
            �3����r[r!�O>~�`$��p�$6֍0Xd��1�|9.�<] ���JKL�2)��#Y+`@6�n���l���l��3O
                                                                                        �
|Ӛ������	u�_L�2�
                       ���������ybÂC
                                     <$ô���y�@�4��d65����zg͵F{�z
��|���	�\�4u���OKf`ƖD�B�k��~��?�3y���s�/��?d���`����H��`|:�=p�h���]�����`\.�yӮ�
                                                                                       F�
|��7(�y�@�Q��W�z        ���l���Z�Z_emm�R��J]��+�=�����M�w� ��                      o
w��1Y+��ܜ�Xѳ/��|�"�3
+                    ��yn��m�Rc:x�W�����(��jR� w}S,	��N��Su��.5	����P+<
 �X��%� \ �X�.��*��0V}�'�=춮gp~�s_�M>                                                
@�T"������o�B=��!�V���^;���������                                                   
R����xK�C^z�>S�w��S9r�20��p�t��̌���o                                                    
                                     �� 2LO�G^+��[����v�X4o                          
                                                               |3	�۰�20����W6b ��$ 
��m���1Z$5��>�����;����~��%�n��Q�ֺ��k                                                    
                                     �R6w�(��X������]/����Q�L���                    
                                                                     ���                 
3��Y��                                                                                  
       t��b���]�5}�Z �m����F7�<N������'�liL�E�Q�f�e�                                   
                                                      @F:�,����V��]-#�{�]�Eز}��A��%:� 
                                                                                         
35u'71�fH�a�ݑ�EN_���_�Z&��Q����"��H��������a���x]:��h�[����ܝ��9��I���7x�W�������� 
����r�@�Q�`Fԉ�����H?"��y�%�㬉���t��0�y���)O���#�_��2ϸ"��:)h������>���L���D��l�       
|X�=�3�o�M�Kg��P:p��Qrd��#H}��gq�����R&��@�t���&��m-�P|�)                 ��c|~ 
                                                                 �dg�3��gtR�%Do         
                                                                                F�h�t0u 
                                                                                        �
����RJ)��RJ)��RJ)��RJ)��RJ)��RJ)��RJ)��RJ)��RJ)��*3�\㓸����IEND�B`�                   

User avatar
erikdubois
Captain
Posts: 2341
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:
Belgium
Re: [OPEN] neofetch - update error

Post by erikdubois » Tue Jun 19, 2018 9:33 pm

We will investigate it and get back to you.
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.

User avatar
erikdubois
Captain
Posts: 2341
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:
Belgium
Re: [OPEN] neofetch - update error

Post by erikdubois » Tue Jun 19, 2018 10:04 pm

Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.

User avatar
MicroCode
Crewman
Posts: 21
Joined: Mon Jan 08, 2018 9:32 am
Croatia
Re: [OPEN] neofetch - update error

Post by MicroCode » Tue Jun 19, 2018 10:24 pm

erikdubois wrote:
Tue Jun 19, 2018 10:04 pm
Here you can find the fix.

https://arcolinux.com/how-to-fix-the-ne ... version-5/
/home/usename/.config/neofetch/config
add ==>> #image_source="/etc/neofetch/arcolinux.png"

Thanks Erik, now works good ;)

hunter4o83
recruit crewman
Posts: 1
Joined: Tue Jun 19, 2018 11:10 pm
Bulgaria
Re: [OPEN] neofetch - update error

Post by hunter4o83 » Tue Jun 19, 2018 11:17 pm

erikdubois wrote:
Tue Jun 19, 2018 10:04 pm
Here you can find the fix.

https://arcolinux.com/how-to-fix-the-ne ... version-5/
Тhanks ;)

unitymedia
Crewman
Posts: 100
Joined: Tue Dec 26, 2017 2:00 pm
Germany
Re: [SOLVED] neofetch - update error

Post by unitymedia » Tue Jun 26, 2018 4:56 pm

I am missing the folder skel !!
bin boot dev etc home lib lib64 lost+found mnt opt proc root run sbin srv sys tmp usr var
[user@user-pc /]$

ArcolinuxB-cinn v6.8.2

User avatar
erikdubois
Captain
Posts: 2341
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:
Belgium
Re: [SOLVED] neofetch - update error

Post by erikdubois » Tue Jun 26, 2018 10:07 pm

Skel folder is in etc.

That is why we speak about /etc/skel.

First slash is the root of your system.
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.

unitymedia
Crewman
Posts: 100
Joined: Tue Dec 26, 2017 2:00 pm
Germany
Re: [SOLVED] neofetch - update error

Post by unitymedia » Wed Jun 27, 2018 8:48 am

Thank you
Did everything video instructions
I copied the file from skel to config, restarted it stays the same, here the file from skel folder

Code: Select all

# See this wiki page for more info:
# https://github.com/dylanaraps/neofetch/wiki/Customizing-Info
print_info() {
    info title
    info underline

    info "OS" distro
    #info "Host" model
    info "Kernel" kernel
    info "Uptime" uptime
    info "Packages" packages
    info "Shell" shell
    info "Resolution" resolution
    info "DE" de
    info "WM" wm
    info "WM Theme" wm_theme
    info "Theme" theme
    info "Icons" icons
    info "Terminal" term
    info "Terminal Font" term_font
    info "CPU" cpu
    info "GPU" gpu
    info "Memory" memory

    # info "GPU Driver" gpu_driver  # Linux/macOS only
    # info "CPU Usage" cpu_usage
    # info "Disk" disk
    # info "Battery" battery
    # info "Font" font
    # info "Song" song
    # info "Local IP" local_ip
    # info "Public IP" public_ip
    # info "Users" users
    # info "Locale" locale  # This only works on glibc systems.

    info line_break
    info cols
    info line_break
}


# Kernel


# Shorten the output of the kernel function.
#
# Default:  'on'
# Values:   'on', 'off'
# Flag:     --kernel_shorthand
# Supports: Everything except *BSDs (except PacBSD and PC-BSD)
#
# Example:
# on:  '4.8.9-1-ARCH'
# off: 'Linux 4.8.9-1-ARCH'
kernel_shorthand="on"


# Distro


# Shorten the output of the distro function
#
# Default:  'off'
# Values:   'on', 'off', 'tiny'
# Flag:     --distro_shorthand
# Supports: Everything except Windows and Haiku
distro_shorthand="on"

# Show/Hide OS Architecture.
# Show 'x86_64', 'x86' and etc in 'Distro:' output.
#
# Default: 'on'
# Values:  'on', 'off'
# Flag:    --os_arch
#
# Example:
# on:  'Arch Linux x86_64'
# off: 'Arch Linux'
os_arch="off"


# Uptime


# Shorten the output of the uptime function
#
# Default: 'on'
# Values:  'on', 'off', 'tiny'
# Flag:    --uptime_shorthand
#
# Example:
# on:   '2 days, 10 hours, 3 mins'
# off:  '2 days, 10 hours, 3 minutes'
# tiny: '2d 10h 3m'
uptime_shorthand="on"


# Packages


# Show/Hide Package Manager names.
#
# Default: 'tiny'
# Values:  'on', 'tiny' 'off'
# Flag:    --package_managers
#
# Example:
# on:   '998 (pacman), 8 (flatpak), 4 (snap)'
# tiny: '908 (pacman, flatpak, snap)'
# off:  '908'
package_managers="on"


# Shell


# Show the path to $SHELL
#
# Default: 'off'
# Values:  'on', 'off'
# Flag:    --shell_path
#
# Example:
# on:  '/bin/bash'
# off: 'bash'
shell_path="off"

# Show $SHELL version
#
# Default: 'on'
# Values:  'on', 'off'
# Flag:    --shell_version
#
# Example:
# on:  'bash 4.4.5'
# off: 'bash'
shell_version="on"


# CPU


# CPU speed type
#
# Default: 'bios_limit'
# Values: 'scaling_cur_freq', 'scaling_min_freq', 'scaling_max_freq', 'bios_limit'.
# Flag:    --speed_type
# Supports: Linux with 'cpufreq'
# NOTE: Any file in '/sys/devices/system/cpu/cpu0/cpufreq' can be used as a value.
speed_type="bios_limit"

# CPU speed shorthand
#
# Default: 'off'
# Values: 'on', 'off'.
# Flag:    --speed_shorthand.
# NOTE: This flag is not supported in systems with CPU speed less than 1 GHz
#
# Example:
# on:    'i7-6500U (4) @ 3.1GHz'
# off:   'i7-6500U (4) @ 3.100GHz'
speed_shorthand="off"

# Enable/Disable CPU brand in output.
#
# Default: 'on'
# Values:  'on', 'off'
# Flag:    --cpu_brand
#
# Example:
# on:   'Intel i7-6500U'
# off:  'i7-6500U (4)'
cpu_brand="on"

# CPU Speed
# Hide/Show CPU speed.
#
# Default: 'on'
# Values:  'on', 'off'
# Flag:    --cpu_speed
#
# Example:
# on:  'Intel i7-6500U (4) @ 3.1GHz'
# off: 'Intel i7-6500U (4)'
cpu_speed="on"

# CPU Cores
# Display CPU cores in output
#
# Default: 'logical'
# Values:  'logical', 'physical', 'off'
# Flag:    --cpu_cores
# Support: 'physical' doesn't work on BSD.
#
# Example:
# logical:  'Intel i7-6500U (4) @ 3.1GHz' (All virtual cores)
# physical: 'Intel i7-6500U (2) @ 3.1GHz' (All physical cores)
# off:      'Intel i7-6500U @ 3.1GHz'
cpu_cores="logical"

# CPU Temperature
# Hide/Show CPU temperature.
# Note the temperature is added to the regular CPU function.
#
# Default: 'off'
# Values:  'C', 'F', 'off'
# Flag:    --cpu_temp
# Supports: Linux, BSD
# NOTE: For FreeBSD and NetBSD-based systems, you'll need to enable
#       coretemp kernel module. This only supports newer Intel processors.
#
# Example:
# C:   'Intel i7-6500U (4) @ 3.1GHz [27.2°C]'
# F:   'Intel i7-6500U (4) @ 3.1GHz [82.0°F]'
# off: 'Intel i7-6500U (4) @ 3.1GHz'
cpu_temp="off"


# GPU


# Enable/Disable GPU Brand
#
# Default: 'on'
# Values:  'on', 'off'
# Flag:    --gpu_brand
#
# Example:
# on:  'AMD HD 7950'
# off: 'HD 7950'
gpu_brand="on"

# Which GPU to display
#
# Default: 'all'
# Values:  'all', 'dedicated', 'integrated'
# Flag:    --gpu_type
# Supports: Linux
#
# Example:
# all:
#   GPU1: AMD HD 7950
#   GPU2: Intel Integrated Graphics
#
# dedicated:
#   GPU1: AMD HD 7950
#
# integrated:
#   GPU1: Intel Integrated Graphics
gpu_type="all"


# Resolution


# Display refresh rate next to each monitor
# Default: 'off'
# Values:  'on', 'off'
# Flag:    --refresh_rate
# Supports: Doesn't work on Windows.
#
# Example:
# on:  '1920x1080 @ 60Hz'
# off: '1920x1080'
refresh_rate="off"


# Gtk Theme / Icons / Font


# Shorten output of GTK Theme / Icons / Font
#
# Default: 'off'
# Values:  'on', 'off'
# Flag:    --gtk_shorthand
#
# Example:
# on:  'Numix, Adwaita'
# off: 'Numix [GTK2], Adwaita [GTK3]'
gtk_shorthand="off"


# Enable/Disable gtk2 Theme / Icons / Font
#
# Default: 'on'
# Values:  'on', 'off'
# Flag:    --gtk2
#
# Example:
# on:  'Numix [GTK2], Adwaita [GTK3]'
# off: 'Adwaita [GTK3]'
gtk2="on"

# Enable/Disable gtk3 Theme / Icons / Font
#
# Default: 'on'
# Values:  'on', 'off'
# Flag:    --gtk3
#
# Example:
# on:  'Numix [GTK2], Adwaita [GTK3]'
# off: 'Numix [GTK2]'
gtk3="on"


# IP Address


# Website to ping for the public IP
#
# Default: 'http://ident.me'
# Values:  'url'
# Flag:    --ip_host
public_ip_host="http://ident.me"



# Disk


# Which disks to display.
# The values can be any /dev/sdXX, mount point or directory.
# NOTE: By default we only show the disk info for '/'.
#
# Default: '/'
# Values:  '/', '/dev/sdXX', '/path/to/drive'.
# Flag:    --disk_show
#
# Example:
# disk_show=('/' '/dev/sdb1'):
#      'Disk (/): 74G / 118G (66%)'
#      'Disk (/mnt/Videos): 823G / 893G (93%)'
#
# disk_show=('/'):
#      'Disk (/): 74G / 118G (66%)'
#
disk_show=('/')

# Disk subtitle.
# What to append to the Disk subtitle.
#
# Default: 'mount'
# Values:  'mount', 'name', 'dir'
# Flag:    --disk_subtitle
#
# Example:
# name:   'Disk (/dev/sda1): 74G / 118G (66%)'
#         'Disk (/dev/sdb2): 74G / 118G (66%)'
#
# mount:  'Disk (/): 74G / 118G (66%)'
#         'Disk (/mnt/Local Disk): 74G / 118G (66%)'
#         'Disk (/mnt/Videos): 74G / 118G (66%)'
#
# dir:    'Disk (/): 74G / 118G (66%)'
#         'Disk (Local Disk): 74G / 118G (66%)'
#         'Disk (Videos): 74G / 118G (66%)'
disk_subtitle="mount"


# Song


# Manually specify a music player.
#
# Default: 'auto'
# Values:  'auto', 'player-name'
# Flag:    --music_player
#
# Available values for 'player-name':
#
# amarok
# audacious
# banshee
# bluemindo
# clementine
# cmus
# deadbeef
# deepin-music
# dragon
# elisa
# exaile
# gnome-music
# gmusicbrowser
# Google Play
# guayadeque
# iTunes
# juk
# lollypop
# mocp
# mopidy
# mpd
# pogo
# pragha
# qmmp
# quodlibet
# rhythmbox
# sayonara
# smplayer
# spotify
# tomahawk
# vlc
# xmms2d
# yarock
music_player="auto"

# Format to display song information.
#
# Default: '%artist% - %album% - %title%'
# Values:  '%artist%', '%album%', '%title%'
# Flag:    --song_format
#
# Example:
# default: 'Song: Jet - Get Born - Sgt Major'
song_format="%artist% - %album% - %title%"

# Print the Artist, Album and Title on separate lines
#
# Default: 'off'
# Values:  'on', 'off'
# Flag:    --song_shorthand
#
# Example:
# on:  'Artist: The Fratellis'
#      'Album: Costello Music'
#      'Song: Chelsea Dagger'
#
# off: 'Song: The Fratellis - Costello Music - Chelsea Dagger'
song_shorthand="off"

# 'mpc' arguments (specify a host, password etc).
#
# Default:  ''
# Example: mpc_args=(-h HOST -P PASSWORD)
mpc_args=()


# Text Colors


# Text Colors
#
# Default:  'distro'
# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
# Flag:     --colors
#
# Each number represents a different part of the text in
# this order: 'title', '@', 'underline', 'subtitle', 'colon', 'info'
#
# Example:
# colors=(distro)      - Text is colored based on Distro colors.
# colors=(4 6 1 8 8 6) - Text is colored in the order above.
colors=(distro)


# Text Options


# Toggle bold text
#
# Default:  'on'
# Values:   'on', 'off'
# Flag:     --bold
bold="on"

# Enable/Disable Underline
#
# Default:  'on'
# Values:   'on', 'off'
# Flag:     --underline
underline_enabled="on"

# Underline character
#
# Default:  '-'
# Values:   'string'
# Flag:     --underline_char
underline_char="-"


# Color Blocks


# Color block range
# The range of colors to print.
#
# Default:  '0', '7'
# Values:   'num'
# Flag:     --block_range
#
# Example:
#
# Display colors 0-7 in the blocks.  (8 colors)
# neofetch --block_range 0 7
#
# Display colors 0-15 in the blocks. (16 colors)
# neofetch --block_range 0 15
block_range=(0 15)

# Toggle color blocks
#
# Default:  'on'
# Values:   'on', 'off'
# Flag:     --color_blocks
color_blocks="on"

# Color block width in spaces
#
# Default:  '3'
# Values:   'num'
# Flag:     --block_width
block_width=3

# Color block height in lines
#
# Default:  '1'
# Values:   'num'
# Flag:     --block_height
block_height=1


# Progress Bars


# Bar characters
#
# Default:  '-', '='
# Values:   'string', 'string'
# Flag:     --bar_char
#
# Example:
# neofetch --bar_char 'elapsed' 'total'
# neofetch --bar_char '-' '='
bar_char_elapsed="-"
bar_char_total="="

# Toggle Bar border
#
# Default:  'on'
# Values:   'on', 'off'
# Flag:     --bar_border
bar_border="on"

# Progress bar length in spaces
# Number of chars long to make the progress bars.
#
# Default:  '15'
# Values:   'num'
# Flag:     --bar_length
bar_length=15

# Progress bar colors
# When set to distro, uses your distro's logo colors.
#
# Default:  'distro', 'distro'
# Values:   'distro', 'num'
# Flag:     --bar_colors
#
# Example:
# neofetch --bar_colors 3 4
# neofetch --bar_colors distro 5
bar_color_elapsed="distro"
bar_color_total="distro"


# Info display
# Display a bar with the info.
#
# Default: 'off'
# Values:  'bar', 'infobar', 'barinfo', 'off'
# Flags:   --cpu_display
#          --memory_display
#          --battery_display
#          --disk_display
#
# Example:
# bar:     '[---=======]'
# infobar: 'info [---=======]'
# barinfo: '[---=======] info'
# off:     'info'
cpu_display="off"
memory_display="off"
battery_display="off"
disk_display="off"


# Backend Settings


# Image backend.
#
# Default:  'ascii'
# Values:   'ascii', 'caca', 'jp2a', 'iterm2', 'off', 'termpix', 'pixterm', 'tycat', 'w3m'
# Flag:     --backend

# Choose next line to have ascii - do not forget to hashtag out the image_source 10 lines down
image_backend="ascii"

# Choose next line to have the logo - do not forget to delete the hashtag of one of the image_sources 10 lines down
#image_backend="w3m"

# Image Source
#
# Which image or ascii file to display.
#
# Default:  'auto'
# Values:   'auto', 'ascii', 'wallpaper', '/path/to/img', '/path/to/ascii', '/path/to/dir/'
# Flag:     --source
#
# NOTE: 'auto' will pick the best image source for whatever image backend is used.
#       In ascii mode, distro ascii art will be used and in an image mode, your
#       wallpaper will be used.
#image_source="auto"
#image_source=$HOME/".config/neofetch/arcolinux-blue-dark.png"
#image_source=$HOME/".config/neofetch/arcolinux.png"
#image_source=$HOME/".config/neofetch/arcolinux-arc.png"
#image_source=$HOME/".config/neofetch/arcolinux-black.png"
#image_source=$HOME/".config/neofetch/arcolinux-blue.png"
#image_source=$HOME/".config/neofetch/arcolinux-blue-dark.png"
#image_source=$HOME/".config/neofetch/arcolinux-blue-darker.png"
#image_source=$HOME/".config/neofetch/arcolinux-evopop.png"
#image_source=$HOME/".config/neofetch/arcolinux-froly.png"
#image_source=$HOME/".config/neofetch/arcolinux-golden.png"
#image_source=$HOME/".config/neofetch/arcolinux-green.png"
#image_source=$HOME/".config/neofetch/arcolinux-havelock.png"
#image_source=$HOME/".config/neofetch/arcolinux-hibiscus.png"
#image_source=$HOME/".config/neofetch/arcolinux-mandy.png"
#image_source=$HOME/".config/neofetch/arcolinux-mantis.png"
#image_source=$HOME/".config/neofetch/arcolinux-niagara.png"
#image_source=$HOME/".config/neofetch/arcolinux-numix.png"
#image_source=$HOME/".config/neofetch/arcolinux-orchid.png"
#image_source=$HOME/".config/neofetch/arcolinux-paper.png"
#image_source=$HOME/".config/neofetch/arcolinux-violet.png"
#image_source=$HOME/".config/neofetch/arcolinux-polo.png"
#image_source=$HOME/".config/neofetch/arcolinux-punch.png"
#image_source=$HOME/".config/neofetch/arcolinux-smoke.png"
#image_source=$HOME/".config/neofetch/arcolinux-tacao.png"
#image_source=$HOME/".config/neofetch/arcolinux-tory.png"
#image_source=$HOME/".config/neofetch/arcolinux-white.png"


# Ascii Options


# Ascii distro
# Which distro's ascii art to display.
#
# Default: 'auto'
# Values:  'auto', 'distro_name'
# Flag:    --ascii_distro
#
# NOTE: Arch and Ubuntu have 'old' logo variants.
#       Change this to 'arch_old' or 'ubuntu_old' to use the old logos.
# NOTE: Ubuntu has flavor variants.
#       Change this to 'Lubuntu', 'Xubuntu', 'Ubuntu-GNOME' or 'Ubuntu-Budgie' to use the flavors.
# NOTE: Arch, Crux and Gentoo have a smaller logo variant.
#       Change this to 'arch_small', 'crux_small' or 'gentoo_small' to use the small logos.
ascii_distro="auto"

# Ascii Colors
#
# Default:  'distro'
# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
# Flag:     --ascii_colors
#
# Example:
# ascii_colors=(distro)      - Ascii is colored based on Distro colors.
# ascii_colors=(4 6 1 8 8 6) - Ascii is colored using these colors.
ascii_colors=(distro)

# Bold ascii logo
# Whether or not to bold the ascii logo.
#
# Default: 'on'
# Values:  'on', 'off'
# Flag:    --ascii_bold
ascii_bold="on"


# Image Options


# Image loop
# Setting this to on will make neofetch redraw the image constantly until
# Ctrl+C is pressed. This fixes display issues in some terminal emulators.
#
# Default:  'off'
# Values:   'on', 'off'
# Flag:     --loop
image_loop="off"

# Thumbnail directory
#
# Default: '~/.cache/thumbnails/neofetch'
# Values:  'dir'
thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch"

# Crop mode
#
# Default:  'normal'
# Values:   'normal', 'fit', 'fill'
# Flag:     --crop_mode
#
# See this wiki page to learn about the fit and fill options.
# https://github.com/dylanaraps/neofetch/wiki/What-is-Waifu-Crop%3F
crop_mode="normal"

# Crop offset
# Note: Only affects 'normal' crop mode.
#
# Default:  'center'
# Values:   'northwest', 'north', 'northeast', 'west', 'center'
#           'east', 'southwest', 'south', 'southeast'
# Flag:     --crop_offset
crop_offset="center"

# Image size
# The image is half the terminal width by default.
#
# Default: 'auto'
# Values:  'auto', '00px', '00%', 'none'
# Flags:   --image_size
#          --size
image_size="300"

# Gap between image and text
#
# Default: '3'
# Values:  'num', '-num'
# Flag:    --gap
gap=3

# Image offsets
# Only works with the w3m backend.
#
# Default: '0'
# Values:  'px'
# Flags:   --xoffset
#          --yoffset
yoffset=10
xoffset=10

# Image background color
# Only works with the w3m backend.
#
# Default: ''
# Values:  'color', 'blue'
# Flag:    --bg_color
background_color=


# Misc Options

# Stdout mode
# Turn off all colors and disables image backend (ASCII/Image).
# Useful for piping into another command.
# Default: 'off'
# Values: 'on', 'off'
stdout="off"

User avatar
erikdubois
Captain
Posts: 2341
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:
Belgium
Re: [SOLVED] neofetch - update error

Post by erikdubois » Wed Jun 27, 2018 9:45 am

I made this post for you.

If you did a copy/paste of /etc/skel do not forget to delete config and config-backup to resolve the scrambled neofetch in termite - https://arcolinux.com/how-to-fix-the-ne ... version-5/
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.

unitymedia
Crewman
Posts: 100
Joined: Tue Dec 26, 2017 2:00 pm
Germany
Re: [SOLVED] neofetch - update error

Post by unitymedia » Wed Jun 27, 2018 10:13 am

Have replaced the file, the error remains because that is the file


Post Reply

Return to “Terminals”