ArcoLinux -D -B 19.11 has been released

[CLOSED] getting error message on boot screen

Post Reply
rbrick49
Crewman
Posts: 24
Joined: Thu Apr 12, 2018 8:10 am
Australia
[CLOSED] getting error message on boot screen

Post by rbrick49 » Fri Apr 20, 2018 11:29 am

can someone take a look please

Code: Select all

error -2
[    8.421275] cfg80211: failed to load regulatory.db
[    8.532156] i8042: PNP: No PS/2 controller found.
[    8.532159] i8042: Probing ports directly.
[    8.535652] serio: i8042 KBD port at 0x60,0x64 irq 1
[    8.535734] serio: i8042 AUX port at 0x60,0x64 irq 12
[    8.560656] iTCO_vendor_support: vendor-support=0
[    8.562712] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.562876] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    8.563068] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.573632] Linux agpgart interface v0.103
[    8.598211] acer_wmi: Acer Laptop ACPI-WMI Extras
[    8.598221] acer_wmi: Unsupported machine has AMW0_GUID1, unable to load
[    8.886573] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.897546] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x00000000f6bbb01b, 98:ee:cb:51:e2:92, XID 0c000880 IRQ 125
[    8.897547] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    9.013612] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    9.244108] cryptd: max_cpu_qlen set to 1000
[    9.504575] AVX2 version of gcm_enc/dec engaged.
[    9.504576] AES CTR mode by8 optimization enabled
[    9.668138] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    9.942644] checking generic (b0000000 1e0000) vs hw (b0000000 10000000)
[    9.942645] fb: switching to inteldrmfb from EFI VGA
[    9.942656] Console: switching to colour dummy device 80x25
[    9.942711] [drm] Replacing VGA console driver
[    9.943381] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.943382] [drm] Driver supports precise vblank timestamp query.
[    9.943752] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.956410] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[    9.957774] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    9.958060] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[    9.958128] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    9.958156] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input12
[    9.969747] fbcon: inteldrmfb (fb0) is primary device
[   10.186379] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[   10.209477] ath10k_pci 0000:03:00.0: enabling device (0000 -> 0002)
[   10.210031] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   10.224613] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   10.368416] pcieport 0000:00:1c.6: AER: Multiple Corrected error received: id=00e6
[   10.368429] pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e6(Receiver ID)
[   10.368434] pcieport 0000:00:1c.6:   device [8086:a116] error status/mask=00000001/00002000
[   10.368438] pcieport 0000:00:1c.6:    [ 0] Receiver Error         (First)
[   10.368444] pcieport 0000:00:1c.6: AER: Multiple Corrected error received: id=00e6
[   10.368452] pcieport 0000:00:1c.6: can't find device of ID00e6
[   10.522709] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[   10.522737] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[   10.526861] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
[   10.539000] ath10k_pci 0000:03:00.0: qca9377 hw1.0 target 0x05020000 chip_id 0x003820ff sub 17aa:4035
[   10.539004] ath10k_pci 0000:03:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
[   10.539796] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.1.0-00002-QCATFSWPZ-5 api 5 features ignore-otp crc32 c3e0d04f
[   10.684416] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[   10.732103] kvm: disabled by bios
[   10.775809] kvm: disabled by bios
[   10.835867] kvm: disabled by bios
[   10.877819] Adding 20461772k swap on /dev/sda4.  Priority:-2 extents:1 across:20461772k FS
[   10.905987] kvm: disabled by bios
[   10.974872] kvm: disabled by bios
[   10.994621] loop: module loaded
[   11.082769] Console: switching to colour frame buffer device 480x135
[   11.082814] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   11.111587] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   11.409316] intel_rapl: Found RAPL domain package
[   11.409317] intel_rapl: Found RAPL domain core
[   11.409318] intel_rapl: Found RAPL domain uncore
[   11.409319] intel_rapl: Found RAPL domain dram
[   11.413718] mousedev: PS/2 mouse device common for all mice
[   11.540906] media: Linux media interface: v0.10
[   11.576236] Bluetooth: Core ver 2.22
[   11.576250] NET: Registered protocol family 31
[   11.576251] Bluetooth: HCI device and connection manager initialized
[   11.576253] Bluetooth: HCI socket layer initialized
[   11.576255] Bluetooth: L2CAP socket layer initialized
[   11.576260] Bluetooth: SCO socket layer initialized
[   11.582629] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC286: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   11.582631] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.582632] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   11.582633] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.582634] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.582635] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   11.582636] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   11.602234] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   11.711698] input: USBest Technology SiS HID Touch Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:0457:11AC.0006/input/input16
[   11.711794] hid-multitouch 0003:0457:11AC.0006: input,hiddev1,hidraw3: USB HID v1.11 Device [USBest Technology SiS HID Touch Controller] on usb-0000:00:14.0-7/input0
[   11.721503] Linux video capture interface: v2.00
[   11.743301] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   11.744260] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   11.744305] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[   11.744363] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[   11.744392] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[   11.744419] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[   11.744446] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[   11.744473] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[   11.880216] usbcore: registered new interface driver btusb
[   12.810602] uvcvideo: Found UVC 1.10 device Intel(R) RealSense(TM) Camera SR300 (8086:0aa5)
[   12.811922] uvcvideo 2-4:1.0: Entity type for entity Processing 2 was not initialized!
[   12.811924] uvcvideo 2-4:1.0: Entity type for entity Camera 1 was not initialized!
[   12.811925] uvcvideo 2-4:1.0: Entity type for entity Extension 3 was not initialized!
[   12.811995] input: Intel(R) RealSense(TM) Camera S as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input24
[   12.812106] uvcvideo: Unknown video format 435a4e49-b602-480f-978c-e4e88ae89b89
[   12.812121] uvcvideo: Unknown video format 52494150-8536-4841-b6bf-8fc6ffb083a8
[   12.812235] uvcvideo: Found UVC 1.10 device Intel(R) RealSense(TM) Camera SR300 (8086:0aa5)
[   12.813235] uvcvideo: Unable to create debugfs 2-2 directory.
[   12.813284] uvcvideo 2-4:1.2: Entity type for entity INV_EU_STRING was not initialized!
[   12.813285] uvcvideo 2-4:1.2: Entity type for entity Camera 5 was not initialized!
[   12.813317] input: Intel(R) RealSense(TM) Camera S as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/input/input25
[   12.813359] usbcore: registered new interface driver uvcvideo
[   12.813359] USB Video Class driver (1.1.1)
[   12.949922] ath10k_pci 0000:03:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[   12.956574] ath: EEPROM regdomain: 0x6c
[   12.956575] ath: EEPROM indicates we should expect a direct regpair map
[   12.956577] ath: Country alpha2 being used: 00
[   12.956577] ath: Regpair used: 0x6c
[   13.129540] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[   13.350803] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   16.119084] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.119088] Bluetooth: BNEP filters: protocol multicast
[   16.119096] Bluetooth: BNEP socket layer initialized
[   17.778691] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   17.862690] r8169 0000:02:00.0 enp2s0: link down
[   17.862842] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   17.881818] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   17.882292] pcieport 0000:00:1c.6: AER: Multiple Corrected error received: id=00e6
[   17.882306] pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e6(Receiver ID)
[   17.882426] pcieport 0000:00:1c.6:   device [8086:a116] error status/mask=00000081/00002000
[   17.882499] pcieport 0000:00:1c.6:    [ 0] Receiver Error         (First)
[   17.882581] pcieport 0000:00:1c.6:    [ 7] Bad DLLP              
[   17.915227] pcieport 0000:00:1c.6: AER: Multiple Corrected error received: id=00e6
[   17.915243] pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e6(Receiver ID)
[   17.915353] pcieport 0000:00:1c.6:   device [8086:a116] error status/mask=00002001/00002000
[   17.915443] pcieport 0000:00:1c.6:    [ 0] Receiver Error         (First)
[   20.295068] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   21.789895] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   23.176101] ahci 0000:00:17.0: port does not support device sleep
[   24.593067] ipmi message handler version 39.2
[   24.649152] ipmi device interface
[   24.806930] nvidia: loading out-of-tree module taints kernel.
[   24.806937] nvidia: module license 'NVIDIA' taints kernel.
[   24.806941] Disabling lock debugging due to kernel taint
[   24.822397] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[   24.822648] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[   24.822865] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  390.48  Thu Mar 22 00:42:57 PDT 2018 (using threaded interrupts)
[   26.704472] bbswitch: version 0.8
[   26.704486] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   26.704496] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   26.704546] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180105/nsarguments-100)
[   26.704990] bbswitch: detected an Optimus _DSM function
[   26.705029] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   27.777679] wlp3s0: authenticate with d4:6e:0e:38:08:96
[   27.809468] wlp3s0: send auth to d4:6e:0e:38:08:96 (try 1/3)
[   27.810099] wlp3s0: authenticated
[   27.813492] wlp3s0: associate with d4:6e:0e:38:08:96 (try 1/3)
[   27.814539] wlp3s0: RX AssocResp from d4:6e:0e:38:08:96 (capab=0x11 status=0 aid=1)
[   27.817968] wlp3s0: associated
[   28.620567] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   36.929975] fuse init (API version 7.26)
[   46.583659] logitech-hidpp-device 0003:046D:405E.0004: HID++ 4.5 device connected.
[   53.246298] Bluetooth: RFCOMM TTY layer initialized
[   53.246305] Bluetooth: RFCOMM socket layer initialized
[   53.246309] Bluetooth: RFCOMM ver 1.11
 grumpy@ron-pc  ~  
Australian living in Thailand

rbrick49
Crewman
Posts: 24
Joined: Thu Apr 12, 2018 8:10 am
Australia
Re: getting error message on boot screen

Post by rbrick49 » Fri Apr 20, 2018 11:35 am

her is the first half

Code: Select all

/home/grumpy/.zshrc:15: command not found: looking
 grumpy@ron-pc  ~  dmesg
[    0.000000] Linux version 4.16.2-2-ARCH (builduser@heftig-11142) (gcc version 7.3.1 20180406 (GCC)) #1 SMP PREEMPT Tue Apr 17 19:37:34 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8dbbb831-a9c3-4c60-9732-1f2b6af165d0 rw quiet resume=UUID=4ff6063c-6742-4a47-be5c-76f4a908d46a
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000727c2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000727c3000-0x00000000727c3fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000727c4000-0x000000007280dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007280e000-0x0000000079579fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007957a000-0x000000007a507fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a508000-0x000000007a540fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007a541000-0x000000007ae61fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ae62000-0x000000007b296fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b297000-0x000000007b2fdfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007b2fe000-0x000000007b2fefff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b300000-0x000000007b3fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ESRT=0x7b1ec918  ACPI=0x7a513000  ACPI 2.0=0x7a513000  SMBIOS=0x7b1cb000  SMBIOS 3.0=0x7b1ca000 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: LENOVO F0C20029TA/3647, BIOS O29KT21AUS 06/30/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x47f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007B800000 mask 7FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x7b2ff max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x000000007b1ec918 to 0x000000007b1ec978.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x31b64a000, 0x31b64afff] PGTABLE
[    0.000000] BRK [0x31b64b000, 0x31b64bfff] PGTABLE
[    0.000000] BRK [0x31b64c000, 0x31b64cfff] PGTABLE
[    0.000000] BRK [0x31b64d000, 0x31b64dfff] PGTABLE
[    0.000000] BRK [0x31b64e000, 0x31b64efff] PGTABLE
[    0.000000] BRK [0x31b64f000, 0x31b64ffff] PGTABLE
[    0.000000] BRK [0x31b650000, 0x31b650fff] PGTABLE
[    0.000000] BRK [0x31b651000, 0x31b651fff] PGTABLE
[    0.000000] BRK [0x31b652000, 0x31b652fff] PGTABLE
[    0.000000] BRK [0x31b653000, 0x31b653fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x371d3000-0x378e0fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007A513000 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000007A5130A8 0000CC (v01 LENOVO TC-O29   00001150 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007A535520 00010C (v05 LENOVO TC-O29   00001150 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007A513200 02231B (v02 LENOVO TC-O29   00001150 INTL 20120913)
[    0.000000] ACPI: FACS 0x000000007AE61F80 000040
[    0.000000] ACPI: APIC 0x000000007A535630 0000BC (v03 LENOVO TC-O29   00001150 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000007A5356F0 000044 (v01 LENOVO TC-O29   00001150 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007A535738 00009C (v01 LENOVO TC-O29   00001150 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007A5357D8 00003C (v01 LENOVO TC-O29   00001150 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007A535818 000038 (v01 LENOVO TC-O29   00001150 AMI. 0005000B)
[    0.000000] ACPI: LPIT 0x000000007A535850 000094 (v01 LENOVO TC-O29   00001150 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A5358E8 000248 (v02 LENOVO TC-O29   00001150 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000007A535B30 002BAE (v02 LENOVO TC-O29   00001150 INTL 20120913)
[    0.000000] ACPI: DBGP 0x000000007A5386E0 000034 (v01 LENOVO TC-O29   00001150 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000007A538718 000054 (v00 LENOVO TC-O29   00001150 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A538770 0006A5 (v02 LENOVO TC-O29   00001150 INTL 20120913)
[    0.000000] ACPI: MSDM 0x000000007A538E18 000055 (v03 LENOVO TC-O29   00001150 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007A538E70 00546E (v02 LENOVO TC-O29   00001150 INTL 20120913)
[    0.000000] ACPI: UEFI 0x000000007A53E2E0 000042 (v01 LENOVO TC-O29   00001150      00000000)
[    0.000000] ACPI: SSDT 0x000000007A53E328 000E73 (v02 LENOVO TC-O29   00001150 INTL 20120913)
[    0.000000] ACPI: BGRT 0x000000007A53F1A0 000038 (v01 LENOVO TC-O29   00001150 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007A53F1D8 00009F (v02 LENOVO TC-O29   00001150 INTL 20120913)
[    0.000000] ACPI: TPM2 0x000000007A53F278 000034 (v03 LENOVO TC-O29   00001150 AMI  00000000)
[    0.000000] ACPI: SSDT 0x000000007A53F2B0 001506 (v01 LENOVO TC-O29   00001150 INTL 20120913)
[    0.000000] ACPI: ASF! 0x000000007A5407B8 0000A5 (v32 LENOVO TC-O29   00001150 TFSM 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000047effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x47effd000-0x47effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000047effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000727c2fff]
[    0.000000]   node   0: [mem 0x000000007280e000-0x0000000079579fff]
[    0.000000]   node   0: [mem 0x000000007b2fe000-0x000000007b2fefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000047effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047effffff]
[    0.000000] On node 0 totalpages: 4162764
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 278 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7701 pages used for memmap
[    0.000000]   DMA32 zone: 492848 pages, LIFO batch:31
[    0.000000]   Normal zone: 57280 pages used for memmap
[    0.000000]   Normal zone: 3665920 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x727c3000-0x727c3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x727c4000-0x7280dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7957a000-0x7a507fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a508000-0x7a540fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a541000-0x7ae61fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ae62000-0x7b296fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b297000-0x7b2fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b2ff000-0x7b2fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b300000-0x7b3fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b400000-0x7bffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4097441
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8dbbb831-a9c3-4c60-9732-1f2b6af165d0 rw quiet resume=UUID=4ff6063c-6742-4a47-be5c-76f4a908d46a
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16236912K/16651056K available (10252K kernel code, 1263K rwdata, 3372K rodata, 1452K init, 632K bss, 414144K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31747 entries in 125 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180105
[    0.000000] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.023333] tsc: Detected 2800.000 MHz processor
[    0.023333] tsc: Detected 2808.000 MHz TSC
[    0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[    0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5618.00 BogoMIPS (lpj=9360000)
[    0.023333] pid_max: default: 32768 minimum: 301
[    0.023333] Security Framework initialized
[    0.023333] Yama: becoming mindful.
[    0.023333] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.027273] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.027316] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.027352] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.027516] CPU: Physical Processor ID: 0
[    0.027516] CPU: Processor Core ID: 0
[    0.027521] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.027521] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.027525] mce: CPU supports 10 MCE banks
[    0.027533] CPU0: Thermal monitoring enabled (TM1)
[    0.027549] process: using mwait in idle threads
[    0.027552] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.027552] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.027553] Spectre V2 : Mitigation: Full generic retpoline
[    0.027554] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.027918] Freeing SMP alternatives memory: 24K
[    0.031262] TSC deadline timer enabled
[    0.031267] smpboot: CPU0: Intel(R) Core(TM) i7-6700T CPU @ 2.80GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.043351] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.043419] ... version:                4
[    0.043419] ... bit width:              48
[    0.043420] ... generic registers:      4
[    0.043421] ... value mask:             0000ffffffffffff
[    0.043421] ... max period:             00007fffffffffff
[    0.043422] ... fixed-purpose events:   3
[    0.043422] ... event mask:             000000070000000f
[    0.050008] Hierarchical SRCU implementation.
[    0.070251] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.076674] smp: Bringing up secondary CPUs ...
[    0.106693] x86: Booting SMP configuration:
[    0.106696] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.287163] smp: Brought up 1 node, 8 CPUs
[    0.287163] smpboot: Max logical packages: 1
[    0.287163] smpboot: Total of 8 processors activated (44945.00 BogoMIPS)
[    0.290389] devtmpfs: initialized
[    0.290389] x86/mm: Memory block size: 128MB
[    0.291006] PM: Registering ACPI NVS region [mem 0x727c3000-0x727c3fff] (4096 bytes)
[    0.291006] PM: Registering ACPI NVS region [mem 0x7a541000-0x7ae61fff] (9572352 bytes)
[    0.291006] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.291006] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.291006] pinctrl core: initialized pinctrl subsystem
[    0.291006] RTC time:  9:09:18, date: 04/20/18
[    0.291006] NET: Registered protocol family 16
[    0.291006] cpuidle: using governor ladder
[    0.291006] cpuidle: using governor menu
[    0.291006] KVM setup pv remote TLB flush
[    0.291006] ACPI: bus type PCI registered
[    0.291006] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.291006] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.291006] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.291006] PCI: Using configuration type 1 for base access
[    0.291006] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.291006] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.293435] ACPI: Added _OSI(Module Device)
[    0.293436] ACPI: Added _OSI(Processor Device)
[    0.293437] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.293437] ACPI: Added _OSI(Processor Aggregator Device)
[    0.294293] ACPI: Executed 26 blocks of module-level executable AML code
[    0.309588] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.313597] ACPI: Dynamic OEM Table Load:
[    0.313603] ACPI: SSDT 0xFFFFA1C1EC280800 00061E (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.313941] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.315086] ACPI: Dynamic OEM Table Load:
[    0.315091] ACPI: SSDT 0xFFFFA1C1EBD2B400 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.315481] ACPI: Dynamic OEM Table Load:
[    0.315484] ACPI: SSDT 0xFFFFA1C1EBD6DF00 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20120913)
[    0.315767] ACPI: Dynamic OEM Table Load:
[    0.315770] ACPI: SSDT 0xFFFFA1C1EBD20600 000130 (v02 PmRef  HwpLvt   00003000 INTL 20120913)
[    0.317400] ACPI: Dynamic OEM Table Load:
[    0.317405] ACPI: SSDT 0xFFFFA1C1EC225000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.318077] ACPI: Dynamic OEM Table Load:
[    0.318080] ACPI: SSDT 0xFFFFA1C1EBD22200 000119 (v02 PmRef  ApHwp    00003000 INTL 20120913)
[    0.318464] ACPI: Dynamic OEM Table Load:
[    0.318468] ACPI: SSDT 0xFFFFA1C1EBD21A00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.324502] ACPI: Interpreter enabled
[    0.324538] ACPI: (supports S0 S3 S4 S5)
[    0.324539] ACPI: Using IOAPIC for interrupt routing
[    0.324574] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.325602] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.328214] ACPI: Power Resource [PG00] (on)
[    0.328735] ACPI: Power Resource [PG01] (on)
[    0.329161] ACPI: Power Resource [PG02] (on)
[    0.331352] ACPI: Power Resource [WRST] (off)
[    0.331734] ACPI: Power Resource [WRST] (off)
[    0.332115] ACPI: Power Resource [WRST] (off)
[    0.332502] ACPI: Power Resource [WRST] (off)
[    0.332880] ACPI: Power Resource [WRST] (off)
[    0.333259] ACPI: Power Resource [WRST] (off)
[    0.333643] ACPI: Power Resource [WRST] (off)
[    0.334022] ACPI: Power Resource [WRST] (off)
[    0.334403] ACPI: Power Resource [WRST] (off)
[    0.334779] ACPI: Power Resource [WRST] (off)
[    0.335160] ACPI: Power Resource [WRST] (off)
[    0.335552] ACPI: Power Resource [WRST] (off)
[    0.335931] ACPI: Power Resource [WRST] (off)
[    0.336316] ACPI: Power Resource [WRST] (off)
[    0.336709] ACPI: Power Resource [WRST] (off)
[    0.337092] ACPI: Power Resource [WRST] (off)
[    0.337471] ACPI: Power Resource [WRST] (off)
[    0.337849] ACPI: Power Resource [WRST] (off)
[    0.338227] ACPI: Power Resource [WRST] (off)
[    0.338603] ACPI: Power Resource [WRST] (off)
[    0.355680] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.355686] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.357377] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.358054] PCI host bridge to bus 0000:00
[    0.358057] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.358058] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.358059] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.358060] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.358061] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.358062] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.358064] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.358065] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.358066] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.358067] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.358068] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.358069] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.358070] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.358071] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.358072] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.358074] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.358075] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.358076] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.358083] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[    0.358439] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.358479] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.358680] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[    0.358690] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[    0.358695] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.358699] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.358713] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.358909] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.358931] pci 0000:00:14.0: reg 0x10: [mem 0xdf110000-0xdf11ffff 64bit]
[    0.358999] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.359176] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.359202] pci 0000:00:16.0: reg 0x10: [mem 0xdf12d000-0xdf12dfff 64bit]
[    0.359277] pci 0000:00:16.0: PME# supported from D3hot
[    0.359446] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.359464] pci 0000:00:17.0: reg 0x10: [mem 0xdf128000-0xdf129fff]
[    0.359471] pci 0000:00:17.0: reg 0x14: [mem 0xdf12c000-0xdf12c0ff]
[    0.359479] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.359486] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.359493] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.359500] pci 0000:00:17.0: reg 0x24: [mem 0xdf12b000-0xdf12b7ff]
[    0.359541] pci 0000:00:17.0: PME# supported from D3hot
[    0.359703] pci 0000:00:1c.0: [8086:a115] type 01 class 0x060400
[    0.359770] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.359975] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
[    0.360044] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.360238] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[    0.360492] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.360506] pci 0000:00:1f.2: reg 0x10: [mem 0xdf124000-0xdf127fff]
[    0.360691] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.360712] pci 0000:00:1f.3: reg 0x10: [mem 0xdf120000-0xdf123fff 64bit]
[    0.360733] pci 0000:00:1f.3: reg 0x20: [mem 0xdf100000-0xdf10ffff 64bit]
[    0.360773] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.360986] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.361046] pci 0000:00:1f.4: reg 0x10: [mem 0xdf12a000-0xdf12a0ff 64bit]
[    0.361116] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.361376] pci 0000:01:00.0: [10de:139a] type 00 class 0x030200
[    0.361403] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.361419] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.361436] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.361447] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.361458] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.370047] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.370049] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.370051] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.370054] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.370121] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.370150] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.370177] pci 0000:02:00.0: reg 0x18: [mem 0xdf400000-0xdf400fff 64bit]
[    0.370193] pci 0000:02:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[    0.370289] pci 0000:02:00.0: supports D1 D2
[    0.370290] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.380045] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.380048] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.380051] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf4fffff]
[    0.380055] pci 0000:00:1c.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.380131] pci 0000:03:00.0: [168c:0042] type 00 class 0x028000
[    0.380179] pci 0000:03:00.0: reg 0x10: [mem 0xdf200000-0xdf3fffff 64bit]
[    0.380342] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.390053] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.390058] pci 0000:00:1c.6:   bridge window [mem 0xdf200000-0xdf3fffff]
[    0.392083] ACPI: PCI Interrupt Link [LNKA] (IRQs 7 *11)
[    0.392144] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10)
[    0.392204] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5) *11
[    0.392263] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 12) *11
[    0.392322] ACPI: PCI Interrupt Link [LNKE] (IRQs 7 *11)
[    0.392380] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10) *11
[    0.392439] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5) *11
[    0.392498] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 12) *11
[    0.392978] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.392978] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.392978] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.392978] vgaarb: loaded
[    0.392978] EDAC MC: Ver: 3.0.0
[    0.392978] Registered efivars operations
[    0.400392] PCI: Using ACPI for IRQ routing
[    0.428369] PCI: pci_cache_line_size set to 64 bytes
[    0.428422] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.428423] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.428424] e820: reserve RAM buffer [mem 0x727c3000-0x73ffffff]
[    0.428425] e820: reserve RAM buffer [mem 0x7957a000-0x7bffffff]
[    0.428426] e820: reserve RAM buffer [mem 0x7b2ff000-0x7bffffff]
[    0.428427] e820: reserve RAM buffer [mem 0x47f000000-0x47fffffff]
[    0.428493] NetLabel: Initializing
[    0.428494] NetLabel:  domain hash size = 128
[    0.428494] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.428505] NetLabel:  unlabeled traffic allowed by default
[    0.428508] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.428508] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.430015] clocksource: Switched to clocksource tsc-early
[    0.438015] VFS: Disk quotas dquot_6.6.0
[    0.438027] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.438071] pnp: PnP ACPI init
[    0.438354] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.438355] system 00:00: [io  0x0a10-0x0a1f] has been reserved
[    0.438356] system 00:00: [io  0x0a20-0x0a2f] has been reserved
[    0.438360] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.438508] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.438510] system 00:01: [io  0xffff] has been reserved
[    0.438511] system 00:01: [io  0xffff] has been reserved
[    0.438513] system 00:01: [io  0xffff] has been reserved
[    0.438514] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.438516] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.438519] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.438605] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.438608] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.438625] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.438659] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.438662] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.438901] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.438903] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.438904] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.438906] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.438907] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.438909] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.438910] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.438911] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.438913] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.438914] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.438918] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.438956] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.438958] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.438959] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.438960] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.438962] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.438963] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.438965] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.438967] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.439271] system 00:07: [io  0xff00-0xfffe] has been reserved
[    0.439275] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.440553] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.440555] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.440556] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.440559] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.441486] pnp: PnP ACPI: found 9 devices
[    0.446945] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.446969] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.446972] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.446975] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.446978] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.446982] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.446985] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.446989] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf4fffff]
[    0.446992] pci 0000:00:1c.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.446998] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.447002] pci 0000:00:1c.6:   bridge window [mem 0xdf200000-0xdf3fffff]
[    0.447010] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.447012] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.447014] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.447016] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.447018] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.447019] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.447021] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.447023] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.447025] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.447027] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.447029] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.447031] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.447033] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.447035] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.447037] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.447039] pci_bus 0000:00: resource 19 [mem 0x80000000-0xdfffffff window]
[    0.447041] pci_bus 0000:00: resource 20 [mem 0xfd000000-0xfe7fffff window]
[    0.447043] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.447045] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.447047] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.447049] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.447051] pci_bus 0000:02: resource 1 [mem 0xdf400000-0xdf4fffff]
[    0.447052] pci_bus 0000:02: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.447054] pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf3fffff]
[    0.447463] NET: Registered protocol family 2
[    0.447648] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.447719] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.447916] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.448051] TCP: Hash tables configured (established 131072 bind 65536)
[    0.448092] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.448138] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.448234] NET: Registered protocol family 1
[    0.448265] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.448816] PCI: CLS 0 bytes, default 64
[    0.448860] Unpacking initramfs...
[    0.552277] Freeing initrd memory: 7224K
[    0.552285] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.552288] software IO TLB [mem 0x730f1000-0x770f1000] (64MB) mapped at [000000005e6d6549-00000000fc6f78f8]
[    0.552313] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[    0.552333] clocksource: Switched to clocksource tsc
[    0.552436] Scanning for low memory corruption every 60 seconds
[    0.552880] Initialise system trusted keyrings
[    0.552887] Key type blacklist registered
[    0.552922] workingset: timestamp_bits=44 max_order=22 bucket_order=0
[    0.553859] zbud: loaded
[    0.555006] Key type asymmetric registered
[    0.555007] Asymmetric key parser 'x509' registered
[    0.555038] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.555070] io scheduler noop registered
[    0.555071] io scheduler deadline registered
[    0.555102] io scheduler cfq registered (default)
[    0.555103] io scheduler mq-deadline registered
[    0.555104] io scheduler kyber registered
[    0.555109] io scheduler bfq registered
[    0.555799] pcieport 0000:00:1c.0: AER enabled with IRQ 121
[    0.555819] pcieport 0000:00:1c.6: AER enabled with IRQ 122
[    0.555832] pcieport 0000:00:01.0: Signaling PME with IRQ 120
[    0.555841] pcieport 0000:00:1c.0: Signaling PME with IRQ 121
[    0.555850] pcieport 0000:00:1c.6: Signaling PME with IRQ 122
[    0.555901] efifb: probing for efifb
[    0.555911] efifb: framebuffer at 0xb0000000, using 1920k, total 1920k
[    0.555912] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.555913] efifb: scrolling: redraw
[    0.555914] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.556770] Console: switching to colour frame buffer device 100x37
[    0.557544] fb0: EFI VGA frame buffer device
[    0.557551] intel_idle: MWAIT substates: 0x142120
[    0.557552] intel_idle: v0.4.1 model 0x5E
[    0.557781] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.557843] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.557849] ACPI: Sleep Button [SLPB]
[    0.557873] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.557879] ACPI: Power Button [PWRB]
[    0.557901] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.557915] ACPI: Power Button [PWRF]
[    0.559687] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.580730] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.581751] intel_pstate: Intel P-state driver initializing
[    0.582067] intel_pstate: HWP enabled
[    0.582284] ledtrig-cpu: registered to indicate activity on CPUs
[    0.582305] intel_pmc_core:  initialized
[    0.582455] NET: Registered protocol family 10
[    0.585594] Segment Routing with IPv6
[    0.585607] NET: Registered protocol family 17
[    0.586038] RAS: Correctable Errors collector initialized.
[    0.586058] microcode: sig=0x506e3, pf=0x2, revision=0xba
[    0.586221] microcode: Microcode Update Driver: v2.2.
[    0.586232] sched_clock: Marking stable (586218118, 0)->(572043050, 14175068)
[    0.586467] registered taskstats version 1
[    0.586470] Loading compiled-in X.509 certificates
[    0.586482] zswap: loaded using pool lzo/zbud
[    0.588423] Key type big_key registered
[    0.589156]   Magic number: 14:60:172
[    0.589175] acpi INT3445:00: hash matches
[    0.589182] acpi device:35: hash matches
[    0.589204] hctosys: unable to open rtc device (rtc0)
[    0.590232] Freeing unused kernel memory: 1452K
[    0.590233] Write protecting the kernel read-only data: 16384k
[    0.590534] Freeing unused kernel memory: 2016K
[    0.591527] Freeing unused kernel memory: 724K
[    0.660303] SCSI subsystem initialized
[    0.662577] ACPI: bus type USB registered
[    0.662595] usbcore: registered new interface driver usbfs
[    0.662603] usbcore: registered new interface driver hub
[    0.662633] usbcore: registered new device driver usb
[    0.666509] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.666514] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.666691] libata version 3.00 loaded.
[    0.667587] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.667592] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.667720] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.667722] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.667723] usb usb1: Product: xHCI Host Controller
[    0.667725] usb usb1: Manufacturer: Linux 4.16.2-2-ARCH xhci-hcd
[    0.667726] usb usb1: SerialNumber: 0000:00:14.0
[    0.667826] hub 1-0:1.0: USB hub found
[    0.667841] hub 1-0:1.0: 10 ports detected
[    0.669484] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.669489] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.669526] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.669528] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.669529] usb usb2: Product: xHCI Host Controller
[    0.669531] usb usb2: Manufacturer: Linux 4.16.2-2-ARCH xhci-hcd
[    0.669532] usb usb2: SerialNumber: 0000:00:14.0
[    0.669617] hub 2-0:1.0: USB hub found
[    0.669627] hub 2-0:1.0: 4 ports detected
[    0.670249] ahci 0000:00:17.0: version 3.0
[    0.680515] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    0.680517] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
[    0.710470] scsi host0: ahci
[    0.710572] scsi host1: ahci
[    0.710706] scsi host2: ahci
[    0.710780] scsi host3: ahci
[    0.710812] ata1: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b100 irq 124
[    0.710813] ata2: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b180 irq 124
[    0.710815] ata3: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b200 irq 124
[    0.710816] ata4: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b280 irq 124
[    0.996741] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    1.022964] ata4: SATA link down (SStatus 4 SControl 300)
[    1.024038] ata3: SATA link down (SStatus 4 SControl 300)
[    1.024069] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.024098] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.025178] ata1.00: ATA-9: WDC WD10SPCX-08S8TT0, 01.01A01, max UDMA/133
[    1.025184] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.026514] ata1.00: configured for UDMA/133
[    1.026974] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10SPCX-08S 1A01 PQ: 0 ANSI: 5
[    1.027072] ata2.00: ATA-9: LITEON L8H-256V2G, G882201, max UDMA/133
[    1.027078] ata2.00: 500118192 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[    1.027845] ata2.00: configured for UDMA/133
[    1.028178] scsi 1:0:0:0: Direct-Access     ATA      LITEON L8H-256V2 201  PQ: 0 ANSI: 5
[    1.035508] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.035514] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.035535] sd 0:0:0:0: [sda] Write Protect is off
[    1.035541] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.035586] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.035659] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.035677] sd 1:0:0:0: [sdb] Write Protect is off
[    1.035682] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.035707] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.037324]  sdb: sdb1 sdb2 sdb3 sdb4
[    1.038082] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.080098]  sda: sda1 sda2 sda3 sda4
[    1.081328] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.140067] usb 1-4: New USB device found, idVendor=046d, idProduct=c52b
[    1.140073] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.140077] usb 1-4: Product: USB Receiver
[    1.140080] usb 1-4: Manufacturer: Logitech
[    1.146443] hidraw: raw HID events driver (C) Jiri Kosina
[    1.153035] usbcore: registered new interface driver usbhid
[    1.153038] usbhid: USB HID core driver
[    1.155880] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[    1.260319] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[    1.268380] input: Logitech Unifying Device. Wireless PID:405e as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:405E.0004/input/input3
[    1.268552] hid-generic 0003:046D:405E.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:405e] on usb-0000:00:14.0-4:1
[    1.270415] input: Logitech Unifying Device. Wireless PID:2010 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:2010.0005/input/input4
[    1.277375] usb 2-4: New USB device found, idVendor=8086, idProduct=0aa5
[    1.277381] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.277385] usb 2-4: Product: Intel(R) RealSense(TM) Camera SR300
[    1.277388] usb 2-4: Manufacturer: Intel(R) RealSense(TM) Camera SR300
[    1.277391] usb 2-4: SerialNumber: 626203005471
[    1.308493] hid-generic 0003:046D:2010.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2010] on usb-0000:00:14.0-4:2
[    1.340092] input: Logitech M720 Triathlon as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:405E.0004/input/input5
[    1.340295] logitech-hidpp-device 0003:046D:405E.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech M720 Triathlon] on usb-0000:00:14.0-4:1
[    1.380092] input: Logitech K800 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:2010.0005/input/input6
[    1.380286] logitech-hidpp-device 0003:046D:2010.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K800] on usb-0000:00:14.0-4:2
[    1.400123] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.540436] usb 1-5: New USB device found, idVendor=0bda, idProduct=0129
[    1.540441] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.540445] usb 1-5: Product: USB2.0-CRW
[    1.540449] usb 1-5: Manufacturer: Generic
[    1.540452] usb 1-5: SerialNumber: 20100201396000000
[    1.544662] usbcore: registered new interface driver rtsx_usb
[    1.663408] usb 1-6: new full-speed USB device number 4 using xhci_hcd
[    1.780613] PM: Starting manual resume from disk
[    1.780866] PM: Image not found (code -22)
[    1.805355] usb 1-6: New USB device found, idVendor=0cf3, idProduct=e360
[    1.805361] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.930141] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[    1.994825] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.078705] usb 1-7: not running at top speed; connect to a high speed hub
[    2.091717] usb 1-7: New USB device found, idVendor=0457, idProduct=11ac
[    2.091722] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.091726] usb 1-7: Product: SiS HID Touch Controller
[    2.091729] usb 1-7: Manufacturer: USBest Technology
[    2.096605] input: USBest Technology SiS HID Touch Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:0457:11AC.0006/input/input7
[    2.096926] hid-generic 0003:0457:11AC.0006: input,hiddev1,hidraw3: USB HID v1.11 Device [USBest Technology SiS HID Touch Controller] on usb-0000:00:14.0-7/input0
[    3.006780] random: crng init done
[    3.437050] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    3.453913] systemd[1]: Detected architecture x86-64.
[    3.476337] systemd[1]: Set hostname to <ron-pc>.
[    5.423415] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.423617] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.423648] systemd[1]: Reached target Remote File Systems.
[    5.423800] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.423922] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.426603] systemd[1]: Created slice system-getty.slice.
[    5.427667] systemd[1]: Listening on Process Core Dump Socket.
[    5.946540] EXT4-fs (sda2): re-mounted. Opts: (null)
[    6.196766] systemd-journald[268]: Received request to flush runtime journal from PID 1
[    7.693960] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    7.693998] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    7.719764] tpm tpm0: A TPM error (379) occurred attempting get random
[    7.867088] rtc_cmos 00:03: RTC can wake from S4
[    7.867459] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    7.867540] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    7.935206] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    7.935209] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    7.935212] RAPL PMU: hw unit of domain package 2^-14 Joules
[    7.935213] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    7.935215] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    7.935217] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    8.050697] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    8.050728] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    8.082062] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.380795] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.382146] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[
Australian living in Thailand

User avatar
erikdubois
Captain
Posts: 2642
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:
Belgium
Re: [OPEN] getting error message on boot screen

Post by erikdubois » Fri Apr 20, 2018 9:28 pm

What line are we talking about?
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.

rbrick49
Crewman
Posts: 24
Joined: Thu Apr 12, 2018 8:10 am
Australia
Re: [OPEN] getting error message on boot screen

Post by rbrick49 » Sat Apr 21, 2018 2:52 am

the error message comes up on the monitor when booting but it is to fast for me to read fully
Australian living in Thailand

User avatar
erikdubois
Captain
Posts: 2642
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:
Belgium
Re: [OPEN] getting error message on boot screen

Post by erikdubois » Sat Apr 21, 2018 7:04 am

Without the message we can not really help you...
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.

marmaduke
Crewman
Posts: 17
Joined: Tue Nov 28, 2017 12:02 pm
Australia
Re: [OPEN] getting error message on boot screen

Post by marmaduke » Mon Apr 23, 2018 11:10 am

I had the same error messages and could not start lightdm. I needed to downgrade the kernel to 4.15. There may be some issue with bbswitch or the nvidia drivers and kernel 4.16

User avatar
erikdubois
Captain
Posts: 2642
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:
Belgium
Re: [OPEN] getting error message on boot screen

Post by erikdubois » Mon Apr 23, 2018 1:14 pm

You can also try a Arch Linux installation and see how that goes.
That will give you insight in your computer.

https://arcolinuxd.com/5-the-actual-ins ... se-1-uefi/
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.


Post Reply

Return to “Kernel & Hardware”