Santa brings you ArcoLinux -D -B 19.12

[SOLVED] When you start the installer, it automatically closes

AndreLevou888
Crewman
Posts: 35
Joined: Tue Aug 28, 2018 3:22 pm
Russia
[SOLVED] When you start the installer, it automatically closes

Post by AndreLevou888 » Sun Jan 13, 2019 4:17 pm

There was a problem during the installation of ArcoLinux (18.12.7). When you start the installer, it automatically closes. Rebooting does not help. Overwriting a bootable flash drive does not help.

User avatar
erikdubois
Captain
Posts: 2685
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:
Belgium
Re: [OPEN] When you start the installer, it automatically closes

Post by erikdubois » Sun Jan 13, 2019 7:38 pm

copy/paste answer from youtube here

Code: Select all

it should not do that. It always stays open on all my arcolinux iso's.
When this happens during development, I start calamares via a terminal in debugging mode
calamares -d
Link youtube comment
https://www.youtube.com/watch?v=ZDMvY0x ... bpR4AaABAg
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.

AndreLevou888
Crewman
Posts: 35
Joined: Tue Aug 28, 2018 3:22 pm
Russia
Re: [OPEN] When you start the installer, it automatically closes

Post by AndreLevou888 » Mon Jan 14, 2019 3:02 pm

erikdubois wrote:
Sun Jan 13, 2019 7:38 pm
copy/paste answer from youtube here

Code: Select all

it should not do that. It always stays open on all my arcolinux iso's.
When this happens during development, I start calamares via a terminal in debugging mode
calamares -d
Link youtube comment
https://www.youtube.com/watch?v=ZDMvY0x ... bpR4AaABAg
Today I tried to connect to another provider, started the installer with the Internet connected, the installer started without failures and the installation was successful. So the problem is not in the hardware. This problem is somehow related to the provider.

User avatar
erikdubois
Captain
Posts: 2685
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:
Belgium
Re: [OPEN] When you start the installer, it automatically closes

Post by erikdubois » Mon Jan 14, 2019 5:02 pm

So the internet connection that you have or not have
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.

AndreLevou888
Crewman
Posts: 35
Joined: Tue Aug 28, 2018 3:22 pm
Russia
Re: [OPEN] When you start the installer, it automatically closes

Post by AndreLevou888 » Mon Jan 14, 2019 5:14 pm

erikdubois wrote:
Mon Jan 14, 2019 5:02 pm
So the internet connection that you have or not have
The problem is not in this when the Internet is connected, the Calamares installer is closed and it is impossible to install the system. But if you turn off the Internet, the installer starts and the system is installed

User avatar
erikdubois
Captain
Posts: 2685
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:
Belgium
Re: [OPEN] When you start the installer, it automatically closes

Post by erikdubois » Tue Jan 15, 2019 8:10 am

How do you turn of the internet?
What do you do exactly?
Might help others.
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.

AndreLevou888
Crewman
Posts: 35
Joined: Tue Aug 28, 2018 3:22 pm
Russia
Re: [OPEN] When you start the installer, it automatically closes

Post by AndreLevou888 » Fri Jan 18, 2019 8:40 am

erikdubois wrote:
Tue Jan 15, 2019 8:10 am
How do you turn of the internet?
What do you do exactly?
Might help others.
I disconnect the ethernet cabel from the laptop, launch calamares, and the installation proceeds normally. But if the ethernet cabel is connected and the Internet is connected, then after launching calamares it closes at the stage of choosing the language of the installer calamares

User avatar
erikdubois
Captain
Posts: 2685
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:
Belgium
Re: [OPEN] When you start the installer, it automatically closes

Post by erikdubois » Fri Jan 18, 2019 10:35 am

I wonder if you get an ip adress if you connect the cable?
ifconfig will show one
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.

AndreLevou888
Crewman
Posts: 35
Joined: Tue Aug 28, 2018 3:22 pm
Russia
Re: [OPEN] When you start the installer, it automatically closes

Post by AndreLevou888 » Fri Jan 18, 2019 1:15 pm

erikdubois wrote:
Fri Jan 18, 2019 10:35 am
I wonder if you get an ip adress if you connect the cable?
ifconfig will show one
how do you explain? when I come to work with my laptop and plug in the cable, launch calamares, it starts up without any problems and the installation proceeds normally. Problems arise at home, I have another provider at home. calamares closes the installer language selection stage. Now I'm at work, I reinstalled the system on a laptop with the cable connected, the installation was excellent

AndreLevou888
Crewman
Posts: 35
Joined: Tue Aug 28, 2018 3:22 pm
Russia
Re: [OPEN] When you start the installer, it automatically closes

Post by AndreLevou888 » Fri Jan 18, 2019 1:18 pm

erikdubois wrote:
Fri Jan 18, 2019 10:35 am
I wonder if you get an ip adress if you connect the cable?
ifconfig will show one
Yes, I get the ip-address when connecting the cable.
received data: ip-address, subnet mask, main gateway. such data gives me my provider


Post Reply

Return to “Calamares installer”